The construction makes uniform building where growing rooms are separated from each other by the walll made of sandwich panels mounted in the axle of growing room oblong wall where steel columns are covered with panels. Moreover, growing rooms are with suspended ceiling. This layout makes every room a separate, independant place. There are 4 rows of shelving in each room what gives 562,80 m², 844,20 m² or 1125,60 m² of growing surface.
General features:
- Construction: steel, bolted, hot deep galvanized
- Covering made of sandwich panels with poliurethane core
- Partition walls thickness 60mm /heat transfer coefficient Uc =0,34 (W/m²K)/
- External walls thickness 80 mm / heat transfer coefficient Uc =0,26 (W/m²K)/
- Suspended ceiling walls thickness 100 mm /heat transfer coefficient Uc =0,21 (W/m²K)/
- Roof made of trapezoid metal sheet, galvanized, coated with polyester lacquer (white) with option for coating with anti-condensation layer. It is also possible to make the roof of sandwich panels with poliurethane core
- 2-row growing rooms with common oblong wall, suspended ceiling and mono-pitched roof
- Recommended length of the room – 24m , 45m
- Recommended width of the room – 6,50 m
- Side walls height – 4,4 m
- Suggested growing area: 562,80 m², 844,20 m² or 1125,60 m² /for 5-bed shelving/
- Side/central corridor with double-pitched roof as an extension
Construction of growing room oblong wall with 2 x 50 mm sandwich panel each. This system makes each room independent and separate . Possibility of building the rooms for 2 rows of shelving /the width of the room is 6,5 m then/
Building project of the mushroom farm, foundations executive project, technological projects, project-executive supervision: general contracting, colour and thickenss of panel covering according to Client`s requirements; Special layers of sandwich panels /PVDF/; growing rooms doors and gates with free-form opening hole performed as sliding/hinged; variety of additional options connected with functionality of the building and equipment.