Types of sprinklers:
Type 1 - trolley
Type 2 - frame
* Control- manometer shows the pressure and water meter indicates the control over the water flow
* Durability- construction made of acid proof steel, resistant to chemicals applied while cultivation
Technical data - Type 1:
1. Equal watering of the whole shelf /width up to 1500 mm/ (equal watering is guaranteed if the equipment is shifted with a constant speed)
2. Trolley with a movable lance that can be vertically adjusted (100 mm) with the possibility of blocking the position in every 20 mm.
3. The standard lance consists of two parts which make it possible to shift the equipment from one room to another.
4. The branch is joined with a lance by ball valve
5. The branches have nozzles turned at an appropriate angle. Numbers of branches matched with number of shelving beds
6. The pressure in the branches is indicated by 2 nanometers.
7. Working pressure on the branch- 0,07 MPa (about 0,7 bar at the pressure in the water system 0,3 MPa with the water installation pipes with diameter min. ¾’’ ).
8. Average liquid consumption per a branch 5 +/- 0,05 dm3 /min
9. The lance can be shifted along the cross guides as well as regulated horizontally and can be vertically adjusted.
10. Liquid consumption with a speed 16 m/min is 0,22/m2
Technical data - Type 2:
1. Equal watering of the whole shelf /width up to 1500 mm/ (equal watering is guaranteed if the equipment is shifted with a constant speed)
2. Number of branches matched with the number of shelving beds.
3. Branches installed on a rotary lance
4. Branches equipped with nozzles.
5. Working pressure on the branch- 0,07 MPa (about 0,7 bar at the pressure in the water system 0,3 MPa with the water installation pipes with diameter min. ¾’’ ).
6. Average liquid consumption per a branch 5 +/- 0,05 dm3 /min
7. Pressure in branches displayed by 1 manometer
- Fitting chemicals dispenser
