In the standard version it is adjusted to work with shelves of a typical growing width, which is 1340 mm, but it can be also tailored to Clients special needs, in accordance with dimensions given by the Client. The loading of the peat casing soil is carried out by lorry /included/ and external pulling winch /not included/ and external conveyor /not included/ where the casing soil is placed/loose or in bags/. Due to the construction machine has increased efficiency, so it is recommended to the growing rooms of bigger growing area. Velocity of placing the casing soil on the shelving is from 3÷12rm/min. Loading time of peat casing in the room with an growing area of 280 meters is about 2 hours.
* Applying flat (adjusted to individual needs) soil layer. It makes possible to binding the fruitbodies in the same time on whole surface of shelving bed. It can translate into higher harvest and easier control of growing process.
It makes easier also the cacing and the soil ruffling.
* It’s strongly reduced the risk of infection during the casing soil loading
* Significant abridgement of soil loading, what is very important especially in the summer and in the winter.
* Financial outlay are lower than in manual loading .
- Feeder drive: electric, regulated by inverter in range: 3÷12 m/min. It allows to adjust the speed of the tape of feeder according to external speed of pulling winch.
- Vertical hoist drive: electric, speed of lifting/lowering approx. 4,4 m/min.
- The drum drive: (rolling the trolley net) : approx. 12-30 m/min (depending on the level of the drum filling with rolled net)
- Total power of the presented above electric drives: 5,6 Kw
- The scope of supported heights of beds* (the scope of supported heights ): 0,25÷3,5 m
- Total weight: 1580 kg
- The weight of movable part: 940 kg
- The weight of loaded casing soil in chuting bath: 500 kg (approx. 0,5 m3 of casing soil)
DIMENSIONS:
- length 5030 mm (6200 mm with thrill) x width 2100 mm x hight 4500 mm (1900 mm after stow for transport the main overhang)
Machine consists of:
- Structure of the base plate with the pulling winch tower
- Chuting bathtub with belt conveyor with stepless regulation
- The chaining conveyor with vertical regulation (the layer thickness from 2-8 cm),
- Toothed leveller with vertical regulation (levelling and aeration of the soil)
- Electric drive of vertical winch roller with rope.
- Stationary table with winder electric drive of net for soil feeding.
- Feeding trolley, pulled on the shelving by rope winch.
- Control cabinet with emergency switch.
Technical data:
- Main frame made of painted steel profiles. Allows to connect various components and keep up the stability of whole machine during its work. Thanks to its own vertical hoist, it’s possible to lift the feeder and chuting bath on demanded height. The machine is moving via wheels. Machine operating after its placing on regulated supports. Additional, removable thill connected with the frame allows the transport of device (in cooperation with any tractor).
-Pouring bathtub is the element of device where the soil is loading from external belt conveyor/bathtub, itp. The pouring bathtub is made from stainless steel.
-The feeder with belt transport the soil from pouring bathtub to controller, which set the thickness of the soil. The scope of possible thickness is from 2÷8cm (in practice the most used is 5÷7cm) and it’s adjustable by screws. From controller, adjusted soil is transported on the growing net by toothed leveller.
- Toothed leveller installed over the belt feeder is pre-leveling the soil and mince it additionally. Depending on the technology of cultivation in latest process of soil loading you can use (or not) external rufflers /not including in the set/
- The trolley is the element which moves on the shelving sideboards through the external, independent pulling winch. Thanks to this it can unroll the net, and at once tip the soil on the compost placed on the growing shelving.
- Vertical hoist is mounted on the main frame of the device. Thanks to this the feeder with belt and chuting bath are lifted on demanded height, what allows the soil loading for any bed of the growing shelving.
