* Tightness – thanks to a modern construction of the door leaf rail and EPDM gasket
* Hygiene – uncovered rail gives the access to the places were dirt can accumulate
* Ergonomics – sliding doors allow to maximally use the area of a corridor and reduce air flow between rooms
STANDARD DIMENSIONS PARAMETRES FOR SLIDING DOORS
| DOOR LEAF |
inox | inox | inox | inox |
| HINGES/FRAME/TRACK |
inox/inox/inox | inox/inox/inox | inox/inox/inox | inox/inox/inox |
EXTERNAL WIDTH OF A FRAME |
1450 | 1740 | 1250 | 1500 |
EXTERNAL HEIGHT OF A FRAME |
2200 | 2460 | 2200 | 2200 |
THICKNESS |
80/optionally 100 | 80/optionally 100 | 80 | 80 |
INSULATION |
POLYURETHANE | POLYURETHANE | POLYURETHANE | POLYURETHANE |
HEAT TRANSFER COEFICIENT |
0,26 W/m²k for 80 mm 0,21 W/m²k for 100 mm (refers to the door leaf) | |||
| FINISHING OF A LEAF | swirl pattern metal sheet (for INOX door) and galvanized metal sheet o,5 mm thick, polyester coating 25 µm RAL 9010, line profiles (for aluminium door/PU panel) | |||
Technical data:
INOX DOOR
- The door leaf is made of stainless steel sheets that are welded together in a casing that is filled with rigid, self-extinguishing polyurethane foam. The technology that uses liquid polyurethane guarantees an ideally flat surface and an even insulation on the whole door leaf. Because of liquid polyurethane injection technology the infirm thermal points and as a result decayed places the door leaf do not occur.
- EPDM gaskets of high deformation zone
- Self-supporting frame made of stainless steel profiles
- Threshold put into the floor
- Rail made of stainless steel tube. Over pressing of the rail enables to clamp the leaf to the frame
making the doors tight.
- Spring stops damp down even a very strong opening or closing.
ALU DOOR/PU PANEL
- Frame of the leaf made of screwed aluminium profiles. The door leaf made of sandwich panel filled with polyurethane core. The technology that uses liquid polyurethane guarantees an ideally flat surface and an even insulation on the whole door leaf.
- EPDM gaskets of high deformation zone
- The slideway in casing made of aluminium. The technology of rendition ensure perfect tightness (additional door sealing on the bottom gasket on the last phase of the door closing)
- Door bottom slideways screwed to the floor
- Spring stops damp down even a very strong opening or closing
- Additional tightening holder in the door`s bottom
- Frame fittings for finishing the wall`s opening
- Optional door lock
- Application of silicon gaskets
